Sage 100

I ran into something similar with a 2022 to 2023 STD upgrade. Ultimately I uninstalled the two Crystal runtimes (add/remove programs) from the workstation and reinstalled Sage 100 2023.

Had to go back and uninstall Crystal Runtimes then uninstall Sage 100 workstation and reinstall Sage 100 workstation ( all version 2023 ).

I used the above process to get Sage 100 2023 printing without error. To do the same for v2022 I probably would uninstall the crystal runtimes, uninstall the 2023 workstation then uninstall and reinstall v2022 workstation. I haven't done enough 2023 upgrades to tell you if this is the most effective way to get everything working again.

Here is a cross reference to my post on this - Error 200 SY_ReportCommon.PVC Line 705

Did folder / share permissions get updated somehow?

Folder permissions are still the same, Full Control for Everyone.

For the one client, I had not even installed v2023 Client on anyone's workstation - just installing v2023 on the SERVER broke the old-version printing for everyone.  Uninstalling both clients and all Crystals on the server, then reinstalling the old client, fixed it for them.  This means I'm at a standstill with their upgrade until I can find a workaround - and if not, they'll need to spin up a new server which they really don't need, their server is fairly new.  A call to Sage is in order.

For the other client, the issue did not rear its head until I installed v2023 on a workstation, and the issue is confined to just that workstation.

Did folder / share permissions get updated somehow?

You installed v2023 as 32-bit?

Folder permissions are still the same, Full Control for Everyone.

For the one client, I had not even installed v2023 Client on anyone's workstation - just installing v2023 on the SERVER broke the old-version printing for everyone.  Uninstalling both clients and all Crystals on the server, then reinstalling the old client, fixed it for them.  This means I'm at a standstill with their upgrade until I can find a workaround - and if not, they'll need to spin up a new server which they really don't need, their server is fairly new.  A call to Sage is in order.

For the other client, the issue did not rear its head until I installed v2023 on a workstation, and the issue is confined to just that workstation.

Did folder / share permissions get updated somehow?

No, in both cases I installed 64-bit because of the DTR printing issue.  Neither has third party products.  Do you think going to 32 bit might make a difference?

You installed v2023 as 32-bit?

Folder permissions are still the same, Full Control for Everyone.

For the one client, I had not even installed v2023 Client on anyone's workstation - just installing v2023 on the SERVER broke the old-version printing for everyone.  Uninstalling both clients and all Crystals on the server, then reinstalling the old client, fixed it for them.  This means I'm at a standstill with their upgrade until I can find a workaround - and if not, they'll need to spin up a new server which they really don't need, their server is fairly new.  A call to Sage is in order.

For the other client, the issue did not rear its head until I installed v2023 on a workstation, and the issue is confined to just that workstation.

Did folder / share permissions get updated somehow?

Absolutely yes.  We were told that installing 64-bit on a machine breaks 32-bit.

No, in both cases I installed 64-bit because of the DTR printing issue.  Neither has third party products.  Do you think going to 32 bit might make a difference?

You installed v2023 as 32-bit?

Folder permissions are still the same, Full Control for Everyone.

For the one client, I had not even installed v2023 Client on anyone's workstation - just installing v2023 on the SERVER broke the old-version printing for everyone.  Uninstalling both clients and all Crystals on the server, then reinstalling the old client, fixed it for them.  This means I'm at a standstill with their upgrade until I can find a workaround - and if not, they'll need to spin up a new server which they really don't need, their server is fairly new.  A call to Sage is in order.

For the other client, the issue did not rear its head until I installed v2023 on a workstation, and the issue is confined to just that workstation.

Absolutely yes.  We were told that installing 64-bit on a machine breaks 32-bit.

No, in both cases I installed 64-bit because of the DTR printing issue.  Neither has third party products.  Do you think going to 32 bit might make a difference?

You installed v2023 as 32-bit?

Folder permissions are still the same, Full Control for Everyone.

For the one client, I had not even installed v2023 Client on anyone's workstation - just installing v2023 on the SERVER broke the old-version printing for everyone.  Uninstalling both clients and all Crystals on the server, then reinstalling the old client, fixed it for them.  This means I'm at a standstill with their upgrade until I can find a workaround - and if not, they'll need to spin up a new server which they really don't need, their server is fairly new.  A call to Sage is in order.

For the other client, the issue did not rear its head until I installed v2023 on a workstation, and the issue is confined to just that workstation.

Did folder / share permissions get updated somehow?

Ah!  Lesson learned.  Thanks all!

Absolutely yes.  We were told that installing 64-bit on a machine breaks 32-bit.

No, in both cases I installed 64-bit because of the DTR printing issue.  Neither has third party products.  Do you think going to 32 bit might make a difference?

You installed v2023 as 32-bit?

Folder permissions are still the same, Full Control for Everyone.

For the one client, I had not even installed v2023 Client on anyone's workstation - just installing v2023 on the SERVER broke the old-version printing for everyone.  Uninstalling both clients and all Crystals on the server, then reinstalling the old client, fixed it for them.  This means I'm at a standstill with their upgrade until I can find a workaround - and if not, they'll need to spin up a new server which they really don't need, their server is fairly new.  A call to Sage is in order.

For the other client, the issue did not rear its head until I installed v2023 on a workstation, and the issue is confined to just that workstation.

Absolutely yes.  We were told that installing 64-bit on a machine breaks 32-bit.

No, in both cases I installed 64-bit because of the DTR printing issue.  Neither has third party products.  Do you think going to 32 bit might make a difference?

You installed v2023 as 32-bit?

Folder permissions are still the same, Full Control for Everyone.

For the one client, I had not even installed v2023 Client on anyone's workstation - just installing v2023 on the SERVER broke the old-version printing for everyone.  Uninstalling both clients and all Crystals on the server, then reinstalling the old client, fixed it for them.  This means I'm at a standstill with their upgrade until I can find a workaround - and if not, they'll need to spin up a new server which they really don't need, their server is fairly new.  A call to Sage is in order.

For the other client, the issue did not rear its head until I installed v2023 on a workstation, and the issue is confined to just that workstation.

Did folder / share permissions get updated somehow?

Absolutely yes.  We were told that installing 64-bit on a machine breaks 32-bit.

No, in both cases I installed 64-bit because of the DTR printing issue.  Neither has third party products.  Do you think going to 32 bit might make a difference?

You installed v2023 as 32-bit?

Folder permissions are still the same, Full Control for Everyone.

For the one client, I had not even installed v2023 Client on anyone's workstation - just installing v2023 on the SERVER broke the old-version printing for everyone.  Uninstalling both clients and all Crystals on the server, then reinstalling the old client, fixed it for them.  This means I'm at a standstill with their upgrade until I can find a workaround - and if not, they'll need to spin up a new server which they really don't need, their server is fairly new.  A call to Sage is in order.

For the other client, the issue did not rear its head until I installed v2023 on a workstation, and the issue is confined to just that workstation.

Did folder / share permissions get updated somehow?